Printable Version of Topic

Click here to view this topic in its original format

Forums - Hard Drop - Tetris Community _ Strategy/Help _ Movement finesse issues?

Posted by: Jayegg Nov 28 2018, 11:01 PM

So, you know how when you move your piece to the edge, you can spin it to make it move a block or two off the side? well, the first time i turn it, it doesnt move a block to the left or right and stays there. I have to turn it back and re-turn the piece for it to actually move of the edge. Am i doing something wrong?


I am using Jstris.

Sorry if this seems like a dumb question.

Posted by: caffeine Nov 29 2018, 02:27 PM

Check with the wiki guide: https://harddrop.com/wiki/0G_60_Hz_SRS_Movement_Finesse

What piece, what wall, which rotation? Are you sure you're completely letting go of the left/right button before rotating?

Posted by: Jayegg Nov 30 2018, 07:42 AM

QUOTE(caffeine @ Nov 29 2018, 02:27 PM) *

Check with the wiki guide: https://harddrop.com/wiki/0G_60_Hz_SRS_Movement_Finesse

What piece, what wall, which rotation? Are you sure you're completely letting go of the left/right button before rotating?


Ok, well ive tried rotating the pieces again, but for some strange reason i have to let go of the piece and wait for a second, before i can actually move it off the edge.

Posted by: caffeine Nov 30 2018, 10:12 PM

QUOTE(Jayegg @ Nov 30 2018, 01:42 AM) *

QUOTE(caffeine @ Nov 29 2018, 02:27 PM) *

Check with the wiki guide: https://harddrop.com/wiki/0G_60_Hz_SRS_Movement_Finesse

What piece, what wall, which rotation? Are you sure you're completely letting go of the left/right button before rotating?


Ok, well ive tried rotating the pieces again, but for some strange reason i have to let go of the piece and wait for a second, before i can actually move it off the edge.

I'm not sure I understand. The sequence should go sometime like:
Is that what you're doing? Are you sure you're letting go of the move button completely before pressing the rotate button?

Posted by: Jayegg Dec 1 2018, 01:56 AM

QUOTE(caffeine @ Nov 30 2018, 10:12 PM) *

QUOTE(Jayegg @ Nov 30 2018, 01:42 AM) *

QUOTE(caffeine @ Nov 29 2018, 02:27 PM) *

Check with the wiki guide: https://harddrop.com/wiki/0G_60_Hz_SRS_Movement_Finesse

What piece, what wall, which rotation? Are you sure you're completely letting go of the left/right button before rotating?


Ok, well ive tried rotating the pieces again, but for some strange reason i have to let go of the piece and wait for a second, before i can actually move it off the edge.

I'm not sure I understand. The sequence should go sometime like:
  • Press and hold the "move right" button.
  • Wait for the piece to hit the wall.
  • Let go of the "move right" button.
  • Rotate.
Is that what you're doing? Are you sure you're letting go of the move button completely before pressing the rotate button?



Never mind, turns out im actually just stupid and i was unconsciously holding down the move button when i rotated... Sorry for wasting your time Sticking Out Tongue.png

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)